Expert Answers about Trailer Hitch

• Can the Factory Trailer Hitch on a 2018 Toyota Tundra be Replaced
• The only trailer hitch receiver we have that will work on models equipped with a class III factory trailer hitch is the TorkLift SuperHitch Hero Trailer Hitch Receiver part # TLT1300H. If you have the class IV factory trailer hitch then we would not have any trailer hitch receivers for you. If you are unsure whether or not you have a class III or class IV factory trailer hitch then you can take a look at the safety chain loops. If they are vertical then you have a class III but if they...
  view full answer...


• Recommended Trailer Hitch Receiver for a 2017 Toyota Prius Prime
• The Draw-Tite Sportframe Trailer Hitch Receiver part # 24966 is a confirmed fit for your 2017 Toyota Prius Prime and will work well for you. The Draw-Tite Sportframe is a Class I hitch with a 1-1/4" receiver tube opening. In order to keep dirt and debris from getting inside the receiver tube opening, I recommend using the Rubber Hitch Cover part # 22281 while not in use. If you can tell me what you will be using the trailer hitch for I would be glad to offer some additional recommendations...
  view full answer...


• Trailer Hitch Options for a 2003 Kia Sedona
• There are a few trailer hitch options for the 2003 Kia Sedona, the Curt Trailer Hitch Receiver part # C13340 and the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75131 which both have the larger receiver tube opening. I recommend the Curt Trailer Hitch Receiver because there is no drilling required as there would be for the Draw-Tite Max-Frame Trailer Hitch Receiver. Unfortunately, there are not any more cost effective options available. Please note, trailer hitches are specific...
  view full answer...


• Most Hidden Trailer Hitch Receiver For a 2018 Toyota Sienna
• I do have a trailer hitch for your 2018 Toyota Sienna Limited AWD with a hidden cross tube, the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7255 but EcoHitch does not offer a trailer hitch with hidden receiver tube, the EcoHitch Stealth Trailer Hitch Receiver for your Sienna. I have attached for a photo of the EcoHitch Hidden Trailer Hitch Receiver installed as well as an install video. As you can see, the trailer hitch is very inconspicuous and more so than any other option for...
  view full answer...


• Can I Use A Weight Distribution Hitch Or An Adapter With A Class II Trailer Hitch
• Class II trailer hitches are not manufactured for weight distribution. Due to this, there are not any weight distribution hitch manufacturers designing systems for Class II trailer hitches. The addition of a hitch adapter does not change this fact. You only have two options in this scenario. If possible, you can replace your Class II trailer hitch with a Class III trailer hitch. The second option is to reduce the tongue weight on your trailer. You can shift the load of your trailer rearward...
  view full answer...


• Will Master Lock Trailer Hitch Receiver Lock Fit the Curt Trailer Hitch C13149
• The Master Lock Trailer Hitch Receiver Lock # 1479DAT will work great with the Curt Trailer Hitch # C13149. The Curt trailer hitch has a 2 inch hitch receiver and the Master Lock hitch lock is designed to work with 2 inch hitch receivers. This hitch pin lock has an inside pin length of 2-3/4 inches and a 5/8 inch pin diameter. The Curt Trailer Hitch Receiver # C13149 is confirmed to fit your 2006 Toyota RAV4. I have attached an installation video of this hitch on a 2007 RAV4 for you.
  view full answer...


• Is There a TorkLift Trailer Hitch for a 2005 Dodge Ram 3500 without Factory Trailer Hitch
• I do have an option for you but the only TorkLift Trailer Hitch options available for a 2005 Dodge Ram 3500 require the factory trailer hitch to be in place such as the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLD1102. If this isn't an option for you I recommend the Curt Trailer Hitch Receiver part # C15809 which will bolt up to the frame without a factory trailer hitch in place.
  view full answer...


• Highest Rated Trailer Hitch Receiver for a 2015 Toyota Sequoia
• The gross trailer weight (GTW) and tongue weight (TW) capacities of the trailer hitch receiver you have on your 2015 Toyota Sequoia should be printed on the unit itself. If it is a factory trailer hitch receiver then it may also be located in the owner's manual. The only trailer hitch receiver we have for you is the Curt Trailer Hitch Receiver part # 13442 which is a Class III hitch with a 6,000 lb gross trailer weight (GTW) and 600 lb tongue weight (TW) rating. However, if you will be...
  view full answer...


• What Are the Specs for the Lippert 2 Inch Trailer Hitch Receiver LC730647
• The Lippert 2" Trailer Hitch Receiver part # LC730647 is specific to Vanleigh 5th Wheel Trailers. If you take a look at the attached photo you will see that there are tabs on this trailer that sit below the frame and the trailer hitch attaches to these. These two tabs are spaced 72" apart so if this is what you have then the Lippert 2" Trailer Hitch Receiver will work but I don't have any sort of spec sheet on this as it is a custom fit trailer hitch. If you don't have a Vanleigh 5th...
  view full answer...


• Trailer Hitch Recommendation for a 2003 Coachmen Mirada on a Ford Chassis
• We may have a trailer hitch that will work with your 2003 Coachmen Mirada, however the Curt Custom Fit Class V Trailer Hitch, # C14048, that you referenced will not fit Class A motor homes. Before installing a Class V trailer hitch on your Mirada, I recommend checking your owners manual or with an RV dealer to determine the towing capacity of your motor home. Most motor homes do not have high towing capacities, so a Class V hitch may be overkill. Our Class V trailer hitches are universal...
  view full answer...


• Trailer Hitch Options For 2022 Toyota Highlander Platinum
• When I checked with Curt, their trailer hitch options remained the same for your 2022 Toyota Highlander Platinum. The same held true for Draw-Tite's options. I have to think the same will hold for etrailer's trailer hitch options. My recommendation is the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2", part # e75ZR. There is not much difference between our trailer hitch options, but the etrailer trailer hitch is the only one that comes in a matte black....
  view full answer...


• Recommendation For Trailer Hitch Mostly Hidden On 2014 Dodge Charger
• All of the trailer hitches available for your 2014 Dodge Charger, including the Hidden Hitch Trailer Hitch will have the receiver visible from the back of the vehicle. The least visible of all of the trailer hitches for your charger would be the Curt Class II Trailer Hitch, # C12064. This hitch has the receiver welded to the underside of the hitch crosstube which conceals the crosstube more than other trailer hitches. I am attaching a photo of the Curt hitch installed on a 2014 Dodge...
  view full answer...


• American Made Trailer Hitch Receiver for a 2000 Toyota Tundra
• The Draw-Tite Trailer Hitch Receiver part # 37130 as with all Draw-Tite trailer hitch receivers is made in Mexico. For a trailer hitch made in the U.S.A that is also a confirmed to fit for your 2000 Toyota Tundra, I recommend taking a look at the Curt Trailer Hitch Receiver part # 13184. The Curt trailer hitch receiver is a Class III hitch with a 2" receiver tube opening. The hitch is rated for use with trailers that have a gross trailer weight (GTW) and tongue weight (TW) rating of up...
  view full answer...


• Trailer Hitch Fits for 2019 Chevy Silverado 1500
• I can tell you exactly which trailer hitches fit your new body style of 2019 Chevy Silverado 1500, and there are two options depending on if you have the factory hitch or not, though neither of the hitches are a Class IV square tube hitch. The only trailer hitches that fit your 2019 Chevy Silverado are: - If you do NOT have the factory trailer hitch receiver: Curt Trailer Hitch Receiver # C13393 - If you DO have the factory trailer hitch receiver: Curt Trailer Hitch Receiver # C15307 The...
  view full answer...


• Will Curt Trailer Hitch 15409 Fit a 2007 Dodge Ram 2500 with Factory Installed Trailer Hitch
• Yes, the Curt trailer hitch # C15409 will fit a 2007 Ram 2500 if it has the OEM trailer hitch. The Curt hitch will fit under the OEM hitch. I have included a link to a video showing a typical installation of this hitch and a link to the instructions for you.
  view full answer...


• Can I Use A Yakima HoldUp Bike Rack With A Trailer Hitch On A 2021 Volkswagen ID 4
• The Yakima HoldUp Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount, part # Y02443, will work with the trailer hitch on your 2021 Volkswagen ID 4. Provided your trailer hitch is a Class III trailer hitch. If you do not have a trailer hitch, we do have many options. My recommendation is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C57JR. This trailer hitch has a maximum tongue weight of 300 lb and a maximum gross trailer weight of 3,000 lb. It is the easiest to install...
  view full answer...


• Can A Hitch Extender Be Used With A Lock N Roll Articulating Hitch
• Yes, you could use the Trailer Hitch Extender for 2" Hitch Receivers # e48YR with a Lock N Roll Articulating Hitch like part # 336VS503505, but you'll be reducing the capacity of your vehicle's trailer hitch by 50%. If the trailer hitch is rated for 5,000lbs then you'd still have enough capacity for your 2,300lb trailer.
  view full answer...


• Difference Between Curt Trailer Hitch Receivers For 2023 Volkswagen ID 4
• The difference between the Curt trailer hitches for your 2023 Volkswagen ID 4 is the fit. If you do NOT have a trailer hitch receiver on your ID 4 already use the Curt Trailer Hitch Receiver # C47JR. If you DO have a hitch the correct fit - which will replace the factory hitch - is the Curt Trailer Hitch Receiver # C57JR.
  view full answer...


• Trailer Hitch Receiver Lock for a Hitch Cover on a 2006 Dodge Ram
• Yes, # e98880, Trailer Hitch Receiver Lock - Flush Design for 2 inch Trailer Hitches will work with a 2 inch trailer hitch cover. The lock has a 2-5/8 inch inside width, which is the standard size for 2 inch receiver hitches, but they do come with longer shanks for wider hitches. If you could measure the outside of the receiver tube at the hitch pin hole you should be able to choose the correct lock if the # e98880 model will not work for the hitch on the truck. A 2006 Dodge Diesel should...
  view full answer...


• Will Installing a Trailer Hitch Still Allow Hands Free Liftgate to Work on a 2019 Chrysler Pacifica
• A trailer hitch won't keep the hands free liftgate on your 2019 Chrysler Pacifica from working but it may be a little more difficult for the sensors to pick up the movement from your foot due to the extra material that is blocking it. If you check out the picture that I attached you can see the places that we have found work best with a trailer hitch installed if you use a forward and back kicking motion as opposed to swiping left to right. If you haven't already decided on a trailer hitch...
  view full answer...